Sagemcom RCI88 - 320 KDG --- Arrow keys problem

Wolfi101 · Post by **Wolfi101** » Thu Feb 11, 2016 8:14 am

When I press an arrow key it received on the STB mostly twice, sometimes three times and sometimes once.

Post by **The Robman** » Thu Feb 11, 2016 10:53 am

Try this...
http://www.hifi-remote.com/forums/dload ... e_id=12867

Wolfi101 · Post by **Wolfi101** » Mon Feb 15, 2016 3:51 am

Hi Rob,

thanks for the quick reply.
Unfortunately with the image that you proposed I get the problem the other way round.
I have to hit most of the keys twice before it gets recognized.

Thanks,
Wolfram

alanrichey · Post by **alanrichey** » Tue Feb 16, 2016 3:26 am

Rob: I thought I had a Nokia32 (No Repeat) in my Protocols.ini, but it seems to have disappeared. Can you confirm the byte change ? Then I can build a proper BIN file for this user.

Post by **The Robman** » Tue Feb 16, 2016 7:34 am

The bin file that I posted is one of your "no repeat" bin files, but it appears that he needs one with one or two repeats.

alanrichey · Post by **alanrichey** » Tue Feb 16, 2016 8:24 am

I saw that, but my RM didn't decode it properly as I don't have the entry. I should be able to figure out the byte change though.

No idea how you set the repeat to 1 though.

alanrichey · Post by **alanrichey** » Tue Feb 16, 2016 10:11 am

Found it. And while searching I found that 3FG had posted this:

[Nokia32 one repeat]
PID=01 FF
DevParms=Device,Sub Device,X:7
DeviceTranslator=Translator(0,8,0) Translator(1,8,8) Translator(2,7,17)
FixedData=00 00 00
CmdParms=OBC=0
CmdTranslator=Translator()
Code.S3C80=47 93 31 8B 12 87 44 00 00 00 54 9C 2C 00 54 00 22 9C 40 00 CE 00 76 F6 FF 1E F6 FF 1E AF 1C 1E F6 01 4C 4C 00 87 64 03 5C 04 F6 FF 37 4E 37 44 F4 1C 14 F6 01 4C AF 1C 18 F6 01 4C 90 C6 90 C6 28 C6 56 C2 03 2E C6 F8 00 4F F6 01 58 2A F7 5A E6 AF

Maybe that will work ?

Post by **The Robman** » Tue Feb 16, 2016 12:37 pm

I misspoke about it being a no repeat version, it uses the 1-repeat code, so maybe he needs a 2-repeat version?

Post by **The Robman** » Tue Feb 16, 2016 12:55 pm

Here's a 2 repeat version...

[Nokia32 two repeats]
PID=01 FF
DevParms=Device,Sub Device,X:7
DeviceTranslator=Translator(0,8,0) Translator(1,8,8) Translator(2,7,17)
FixedData=00 00 00
CmdParms=OBC=0
CmdTranslator=Translator()
Code.S3C80=47 93 31 8B 12 87 44 00 00 00 54 9C 2C 00 54 00 22 9C 40 00 CE 00 76 F6 FF 21 F6 FF 21 F6 FF 21 AF 1C 1E F6 01 4C 4C 00 87 64 03 5C 04 F6 FF 3A 4E 37 44 F4 1C 14 F6 01 4C AF 1C 18 F6 01 4C 90 C6 90 C6 28 C6 56 C2 03 2E C6 F8 00 4F F6 01 58 2A F7 5A E6 AF

alanrichey · Post by **alanrichey** » Wed Feb 17, 2016 2:16 am

OK, here's the BIN files using that

http://www.hifi-remote.com/forums/dload ... e_id=13926

Wolfi101 · Post by **Wolfi101** » Fri Feb 19, 2016 1:45 am

Many thanks for your investigation.
Unfortunately there is no file behind the download link you attached.
Maybe you just forgot to upload it?

alanrichey · Post by **alanrichey** » Fri Feb 19, 2016 2:44 am

Works for me. What are you seeing ?

Wolfi101 · Post by **Wolfi101** » Fri Feb 19, 2016 2:47 am

Now I can download it. Don't know what was wrong. Thanks!

Wolfi101 · Post by **Wolfi101** » Fri Feb 19, 2016 4:04 am

I tried the new bin file, but unfortunately I cannot get any reaction on a key press.
The strange thing: the bahaviour seems to vary a bit.
I also tried the first binary posted here and now this does not work anymore as well.
I tried again the original setting (KabelDeutschland AG - DVR20) and now I get single key presses around 60% and double key presses around 40%.

I'm really puzzeled...

alanrichey · Post by **alanrichey** » Sat Feb 20, 2016 1:17 am

If the behaviour is intermittent you probably have an IR problem. IR Blaster placement ?