 |
JP1 Remotes
|
| View previous topic :: View next topic |
| Author |
Message |
turbogt16v
Joined: 23 Nov 2015
Posts: 20
Location: Croatia
|
 Posted: Sun Dec 13, 2015 3:38 am Post subject: URC 3910 to work with lg projector pa1000 |
 |
|
Hy
i cant sinc my urc 3910 with the projector (pa1000) with the codes given on manual.
is there a reason for that ,and can i get around it ,ty. |
|
| Back to top |
|
 |
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21234
Location: Chicago, IL
|
| Posted: Sun Dec 13, 2015 11:00 am Post subject: |
|
|
To help others help you, based on your previous thread, I have completed the template for you
1. Device: LG PA1000
2. Type of device: projector
3. Year: current
4. JP1/UEI Remote model: URC-3910
5. Do you have a JP1 cable? no
6. Still have original remote? yes
7. Checked the file section? no LG projectors
8. Checked Pronto file section (at R/C)? no LG projectors
9. Partially working setup code? no
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool?
Looking at the user manual, I see that they list several setup codes for LG.
However, if you recall, Steve posted that he believes the LG uses NEC1, dev 4, sub-device 15, which would require an upgrade.
| zaphod7501 wrote: | Which projector is it? If it's the 1500 then it probably uses the same codes as the USA version and some other LG PJs. 00168 is probably the EFC for the "Quick Menu" (as it's called on the US versions) but the format is NEC1, device 4, subdevice 15, which may not be built in and you might require a device upgrade.
There are a number of discrete commands that will work that can be found in the LG master file that can be found in the file section. Danger! note there is a command called power-only that puts the set into a factory mode of some sort that may mess it up badly. |
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
| Back to top |
|
|
turbogt16v
Joined: 23 Nov 2015
Posts: 20
Location: Croatia
|
| Posted: Sun Dec 13, 2015 11:12 am Post subject: |
|
|
| so how do i upgrade it,do i need a cable |
|
| Back to top |
|
|
MrMoody
Joined: 27 Jan 2010
Posts: 185
Location: NC,USA
|
| Posted: Sun Dec 13, 2015 1:35 pm Post subject: |
|
|
Confirmed via Harmony it is NEC1 device 4.15, which is an unusual combination I am unable to find anywhere in UEI's codes including EZ-RC
Unfortunately this is not the same as NEC1 device 4, so yes it will require an upgrade.
I don't believe that remote is upgradeable by any means, someone can correct me if I'm wrong. Look at it and see if it has any connector in the battery compartment or elsewhere. Post a picture if so.
I will upload the upgrade for anyone who may need it for other remotes.
If it was me, I would solve the problem by buying a URC-6440.
_________________
URC-8820 x2, URC-10820N, Insignia NS-RC05A-11 x2, RCA RCRP05B, Potenza ST ADB, OARI06G, URC-7980, OARUSB04G, Nevo C2 x3, AOC 67100BA1-017-R, onn URC-3660, Insignia NS-RMTSNY17, IRWidget |
|
| Back to top |
|
|
vickyg2003
Site Admin
Joined: 20 Mar 2004
Posts: 7073
Location: Florida
|
| Posted: Sun Dec 13, 2015 2:40 pm Post subject: |
|
|
I created an upgrade for this Nec1 4.15 Projector
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13770
| Quote: | | so how do i upgrade it,do i need a cable |
If you want to control this projector with a universal remote, you will need a programmable remote control.
That would be any learning remote,
Or remote that can be programmed via computer.
I am unfamiliar with the URC3910, does it have a 6 pin connector? |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
