JP1 Remotes

Kayaker · Joined: 05 Jul 2015 Posts: 6 Location: Toronto, Canada

I have a URC 1056B01 remote with JP1.3 pins. I would like my new audio video pre-amp volume up/down and mute controls to work on it as my brand is not supported by my remote. I'm partial to this remote and just don't use the Harmony that I have programmed.

I'm just not computer savvy enough to get into JP1 programming and have no problem paying for this service.

Let me know if you can help.

Thanks

vickyg2003 · Posted: Sun Jul 05, 2015 5:15 pm Post subject:

What is the make and model of the preamp? There is a lot that can be done from the keypad. Sometimes you don't need the computer if there is a built in signal that carries the correct fixed data.
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.

Kayaker · Joined: 05 Jul 2015 Posts: 6 Location: Toronto, Canada

That would be great if I could do it from the keypad. My pre-amp is a Bryston SP3.

vickyg2003 · Posted: Mon Jul 06, 2015 9:04 am Post subject:

The Bryston uses an unrecognized protocol. So this can't be handled via the keypad. We can create an upgrade but the upgrade needs to be loaded via a jp1 cable......
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.

MrMoody · Joined: 27 Jan 2010 Posts: 185 Location: NC,USA

Where are you located? Perhaps someone lives close to you.
_________________
URC-8820 x2, URC-10820N, Insignia NS-RC05A-11 x2, RCA RCRP05B, Potenza ST ADB, OARI06G, URC-7980, OARUSB04G, Nevo C2 x3, AOC 67100BA1-017-R, onn URC-3660, Insignia NS-RMTSNY17, IRWidget

Kayaker · Joined: 05 Jul 2015 Posts: 6 Location: Toronto, Canada

If you're willing, I could ship you the remote. Other routes might take more hand holding than either one of us is comfortable with.

I might even have 2 done so I have a backup. Let me know, thanks.

Kayaker · Joined: 05 Jul 2015 Posts: 6 Location: Toronto, Canada

I'm just outside Toronto.

Kayaker · Joined: 05 Jul 2015 Posts: 6 Location: Toronto, Canada

I have the HEX codes. Can anyone help?

mdavej · Expert Joined: 08 Oct 2003 Posts: 4501

Feel free to bump this thread as often as you like. Hopefully one of our Canadian members will offer to help. I'd do it myself if you were anywhere but Canada. I've shipped things all over the world without issue. But the last time I shipped something there, it was an expensive customs nightmare. Never again.

Alternatively, if you buy a cable, we could build the file for you so all you'd have to do is plug in and click download.

vickyg2003 · Posted: Wed Jul 08, 2015 1:17 pm Post subject:

Kayaker · Joined: 05 Jul 2015 Posts: 6 Location: Toronto, Canada

I'll get the cable ordered and we can go from there Very Happy

mdavej · Expert Joined: 08 Oct 2003 Posts: 4501

Please post what you plan to buy.