I have a Sony HT6600DP Home Theater in a Box and have been trying to set-up a OFA URC-8811 to control the receiver (STR-K850P) and DVD player (DVP-NC665P). Have uploaded all the codes from the Yahoo groups site that look promising to no avail (e.g. Sony_STR-DE885_Receiver.txt, Sony_STR-K750P_HT-DDW750.txt). As I have misplaced the original remote, I can’t learn and reverse engineer. Does someone have codes already for these components or an idea of how I can build them without the Sony remote?
Many thanks,
Sony STR-K850P & DVP-NC665P
Moderator: Moderators
-
The Robman
- Site Owner
- Posts: 21886
- Joined: Fri Aug 01, 2003 9:37 am
- Location: Chicago, IL
- Contact:
As this is a "Home Theater System", did you check any of the upgrades in the "Home Theater Systems" folder?
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
-
jon_armstrong
- Expert
- Posts: 1238
- Joined: Sun Aug 03, 2003 9:14 pm
- Location: R.I.P. 3/25/2005
- Contact:
Let's start with the basics:
Copy your upload your 8811 in IR and save that file. Upload that file to (use add file) to the diagnosis area
Do a 981 Reset
Put setup code DVD_0533 on the DVD device button
Does setup code DVD_0533 have any commands that work on your DVD?
Your receiver is apparently preset to AV2 according to this article so the device upgrade Sony_STR-DE885_Receiver.txt should have worked since it is set for AV2. But for simplicity sake, why not change the receiver back to AV1 and thensetup code RCVR_1058 will work. Instructions are in the thread above. Note it is model specific.
Once we get those two devices working, then we can tackle the HTIB.
Copy your upload your 8811 in IR and save that file. Upload that file to (use add file) to the diagnosis area
Do a 981 Reset
Put setup code DVD_0533 on the DVD device button
Does setup code DVD_0533 have any commands that work on your DVD?
Your receiver is apparently preset to AV2 according to this article so the device upgrade Sony_STR-DE885_Receiver.txt should have worked since it is set for AV2. But for simplicity sake, why not change the receiver back to AV1 and thensetup code RCVR_1058 will work. Instructions are in the thread above. Note it is model specific.
Once we get those two devices working, then we can tackle the HTIB.
-Jon
-
jon_armstrong
- Expert
- Posts: 1238
- Joined: Sun Aug 03, 2003 9:14 pm
- Location: R.I.P. 3/25/2005
- Contact:
I thought twelliott did that already, but maybe I am assuming something different than you are.The Robman wrote:As this is a "Home Theater System", did you check any of the upgrades in the "Home Theater Systems" folder?
twelliott, is the HTIB something different from the receiver (STR-K850P) and DVD player (DVP-NC665P)? Or are those the model numbers on the components of the HTIB?
-Jon
-
The Robman
- Site Owner
- Posts: 21886
- Joined: Fri Aug 01, 2003 9:37 am
- Location: Chicago, IL
- Contact:
I did a quick scan of the file names in the HT folder and I didn't see the two names he quotes, so I was guessing they were from the Audio and DVD folders.jon_armstrong wrote:I thought twelliott did that already, but maybe I am assuming something different than you are.The Robman wrote:As this is a "Home Theater System", did you check any of the upgrades in the "Home Theater Systems" folder?
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!