JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

NEC 4-device Combo Tutorial?

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
paula0015



Joined: 23 Jan 2010
Posts: 16

                    
PostPosted: Sun Mar 22, 2015 5:00 pm    Post subject: NEC 4-device Combo Tutorial? Reply with quote

I got a shiny new Yamaha RX-V675 amp a month or so ago. Alas, IRDecode says some important keys are NEC-y1.
I have searched around here without finding much more than some very brief explanations about how to configure KM to make an upgrade for my URC-10820 (B00).
I am not sure what I put where on KM's Setup page. The green instructions for entering says something like "Optional" followed by "space" and y1,y2,y3..

(Nuts -- I am having a hard time explaining what I am confused about)

Is there a tutorial somewhere? Failing that -- an example or two for KM Setup?

Thank you.
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Mon Mar 23, 2015 9:55 pm    Post subject: Reply with quote

Paula,
I can't help you with KM, nor do I understand why you would want to use it. However, if you use RemoteMaster, and select the NEC 4DEV Yamaha Combo executor, you'll be able to enter any Yamaha signal.

Also, Chico Woodhill generated a spreadsheet with nearly all possible Yamaha signals, so it probably isn't necessary to learn them.
Back to top
View user's profile Send private message
ElizabethD
Advanced Member


Joined: 09 Feb 2004
Posts: 2348

                    
PostPosted: Mon Mar 23, 2015 10:39 pm    Post subject: Reply with quote

paula0015, Take a look at this KM file for RX657 by Rob
http://hifi-remote.com/forums/dload.php?action=file&file_id=4690
or mine for RX567 which I based on what Rob did and annotated a little bit
http://hifi-remote.com/forums/dload.php?action=file&file_id=9583
Both files can move to RM/RMIR with no trouble.
Look at the functions sheet in KM, it should give you an idea what to put where.
And don't forget to tell KM or RM to change the remote.
_________________
Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride Smile
Back to top
View user's profile Send private message
paula0015



Joined: 23 Jan 2010
Posts: 16

                    
PostPosted: Tue Mar 24, 2015 9:21 am    Post subject: Thanks to both Reply with quote

Thanks, ElizabethD, and 3FG. I found the RM files and have a basic program working in my remote.

I started way-back-when with KM and open it out of habit, forgetting that RM is much easier to use.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control