JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Roku Protocol

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Protocol Decodes
View previous topic :: View next topic  
Author Message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Tue Oct 07, 2014 9:03 pm    Post subject: Roku Protocol Reply with quote

Found this new Roku protocol in the Inteset INT-422:

Code:
Upgrade protocol 0 = 02 1A (S3F80) Manual Settings: 02 1A (RM v2.03 Alpha 24g)
 43 8B 21 8B 12 CF 44 08 08 01 21 03 30 01 21 00
 FD D2 DC 11 94 08 B6 E4 05 06 60 06 20 11 F6 01
 46 F6 01 0A 7B 01 AF 46 05 01 56 06 FE 46 29 01
 8D 01 46
End


Can this be added to protocols.ini for use in other remotes?

There's another new protocol in this file (02 22), but I can't get RM to display the code:

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12776
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Wed Oct 08, 2014 1:17 am    Post subject: Reply with quote

Code:
[Roku Official]
PID=02 1A
DevParms=Device Number=234,Sub Device=194
DeviceTranslator=Translator(lsb,0,8,0) Translator(lsb,1,8,8)
CmdParms=OBC:7
CmdTranslator=Translator(lsb)
FixedData=FF FF
Code.S3C80=43 8B 21 8B 12 CF 44 08 08 01 21 03 30 01 21 00 FD D2 DC 11 94 08 B6 E4 05 06 60 06 20 11 F6 01 46 F6 01 0A 7B 01 AF 46 05 01 56 06 FE 46 29 01 8D 01 46
Code.MAXQ610=33 69 21 0E 16 00 44 03 16 00 12 01 F0 D2 56 01 CA 08 40 80 04 15 D3 D2 01 62 44 44 70 71 72 F2 62 54 04 70 71 73 F3
Notes=This IR protocol is very similar to NEC2, except the OBCs are limited to the range 0-127 and the repeat behavior is different.  The second and additional frames of a repeating signal send the OBC + 128. 

IRP: {38.0k,564}<1,-1|1,-3>(16,-8,D:8,S:8,F:7,0:1,~F:7,1:1,1,^108m, (16,-8,D:8,S:8,F:7,1:1,~F:7,0:1,1,^108m)+)
Related thread
[Edited to correct the IRP.]


Last edited by 3FG on Wed Oct 08, 2014 11:33 pm; edited 1 time in total
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Wed Oct 08, 2014 1:32 am    Post subject: Reply with quote

PID 0222 shoots the Replay IR protocol, which is a member of the RC6 family. In the OARUSB04G, it is used in setup codes SAT 3048 and 3286. It takes 6 fixed bytes and 1 variable byte. More work is needed to decpher it.
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Wed Oct 08, 2014 7:23 am    Post subject: Reply with quote

Thanks!

This is probably obvious from the protocol, but for the layperson, one additional thing I've found with Roku vs. NEC2 is the Hex codes are inverted, i.e., the NEC2 version of the OK command HEX AB becomes HEX 54 in the Roku protocol. So keep that in mind if you take an old Roku upgrade and change the protocol you have to NOT every HEX code as well.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Protocol Decodes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control