Remote control Strong 7300 ci+

Paul M · Post by **Paul M** » Tue Oct 07, 2014 3:18 pm

Need the .bin.file for Strong 7300ci+, HD receiver.
I am not sure if i am able to program the .bin file from cero.
So need some help.

Thanks.

Post by **vickyg2003** » Tue Oct 07, 2014 5:20 pm

Alan is away on vacation until the 22nd. In the meantime have you tried the various Strong bin files in the file area?

Paul M · Post by **Paul M** » Tue Oct 07, 2014 11:47 pm

vickyg2003 wrote:Alan is away on vacation until the 22nd. In the meantime have you tried the various Strong bin files in the file area?

I tríed all strong remote on the slinger and the ones in your datebase are old ones
Do you want to say that I need to upload all bin files to try if its works ?And if you upload 10 bin files, will it be a problem ?
And if you reset the slingbox ,do you have to upload it again .?

Regards and thanks for the quick answer.

Post by **vickyg2003** » Wed Oct 08, 2014 6:42 am

Strong is one of those brands that changes the protocol over and over. If the bin files from the file section don't do the trick, your best bet is to wait for AlanRichey to return on October 22. Alan is our recognized slingbox expert. The rest of us are focused on remotes.

Paul M · Post by **Paul M** » Wed Oct 08, 2014 12:56 pm

vickyg2003 wrote:Strong is one of those brands that changes the protocol over and over. If the bin files from the file section don't do the trick, your best bet is to wait for AlanRichey to return on October 22. Alan is our recognized slingbox expert. The rest of us are focused on remotes.

Thanks .i will wait.

alanrichey · Post by **alanrichey** » Thu Oct 23, 2014 4:23 am

Back now

Yes, another different protocol from Strong.

http://www.hifi-remote.com/forums/dload ... e_id=12833

Any good ?

Paul M · Post by **Paul M** » Fri Oct 24, 2014 2:50 pm

Thanks, I am out of the country until next week. Will let you know if its works
On 1/11. Have a nice day.

alanrichey · Post by **alanrichey** » Sat Oct 25, 2014 10:53 am

You can do it from anywhere, you don't need to be at home

Paul M · Post by **Paul M** » Sat Oct 25, 2014 3:08 pm

At home I tríed it on win7 , but on the ipad and android phone i can not find this option.Think I will wait a few days,
.Thanks

alanrichey · Post by **alanrichey** » Sun Oct 26, 2014 12:16 am

Yes, has to be a PC

Paul M · Post by **Paul M** » Tue Oct 28, 2014 1:01 pm

Just borrowed a PC with Windows 8 and updated the remoted control.
And everything is working fine. Even can turn off/on the sat.
Thank you for the great Job you did. Thank you very much..
Great forum.
Hope that sat does not brake down ¡!!

Regards,

alanrichey · Post by **alanrichey** » Wed Oct 29, 2014 1:00 am

Good, thanks for the feedback

Paul M · Post by **Paul M** » Sat Nov 01, 2014 4:59 am

One thing more. Do not know exact how the slingbox works,but when I turn on the slingbox with the remote control with the app, another media player turns on,Because they have the same remote frequency. This is not new,but is there a way to avoid this. I tríed to hide a little bit the media player but it still turns on.

Regards

alanrichey · Post by **alanrichey** » Sat Nov 01, 2014 5:39 am

It's not the frequency, nearly all remotes use the same frequency, it is the speciific codes. I assume the same thing happens with the real remote ?

Post by **vickyg2003** » Sat Nov 01, 2014 6:01 am

With a slingbox it should be less of a problem, because you should be able to shield the other device from the signal your irblaster sends out.

We see a lot of this kind of cross talk on "no name" devices that use NEC1, 0 signals.

Sometimes media players have "unit" codes, that allow you to change the signal pattern that the unit is going to respond to. That would be in the device manual.

I also have devices that respond to more than one devices that respond to completely different signals than the ones the remote sends.

I have even had a conflict with my xmp devices thinking my sharp TV signals were an XMP pattern. That is the only time just changing the frequency ever fixed a conflict problem for me. Thank goodness, because everytime I changed the picture size, the XMP cable box switched over to Nascar!

So there is a slim chance that there might be some kind of solution, but it all depends on WHY the signal is effecting both units.