need Codes or bin for Medi@link Ixuss one Sat Receiver

[klpe1957]

need Codes or bin for Medi@link Ixuss one Sat Receiver
I will use this for a Slingbox.

Kind Regards,
Klaus

[alanrichey]

Try this one I built for you.

http://www.hifi-remote.com/forums/dload ... e_id=12597

[klpe1957]

Hi.
First thanks for your work, but the pl.bin, which i try to use on my Slingbox 350 does not work for the Ixuss one. Not any key didnt gives me any responce. If you need further information, please tell me.

Are you sure, you give me the right files?


Thanks,
Klaus

[klpe1957]

Hi.
i try to setup this file again after change to another brand remote control and now it works!

I read in another threat, that there is a problem to overwrite a custom remote with another custom. Seems that this was my problem.

Thanks for the file!

Klaus

[alanrichey]

Yes, if you have a 350/500 with multiple inputs configured. Until Sling fix this the trick is to reset ALL the inputs, install the Custom Remote and then re-install the other inputs.

Glad you got it working.

[klpe1957]

Hi.
It would be nice, if you can add Volume Buttons to the remote Control. the right + - Buttons have no function.

Regards,
Klaus

[alanrichey]

I don't normally put the Volume controls in as Sling use them to control the Slingplayer and the codes are never sent to the device. And the Slingplayer already has volume controls. In fact I cannot think of any reason why you should want to change the volume of the device ?

Anyway, done it, and mapped them to the Page+/- buttons.

http://www.hifi-remote.com/forums/dload ... e_id=12598

Don't forget you might have to reset ALL the inputs.

[klpe1957]

i had the problem this morning, that the volume of the device was set to minimum and a must increase it over the Web-Interface of the Ixuss. up to now i can increase the volume with the + - Buttons. thanks for your quick support!!!

[klpe1957]

I don't normally put the Volume controls in as Sling use them to control the Slingplayer and the codes are never sent to the device. And the Slingplayer already has volume controls. In fact I cannot think of any reason why you should want to change the volume of the device ?

Anyway, done it, and mapped them to the Page+/- buttons.

http://www.hifi-remote.com/forums/dload ... e_id=12598

Don't forget you might have to reset ALL the inputs.

The File is not available, please send a working link once more! THX

[alanrichey]

http://www.hifi-remote.com/forums/dload ... e_id=12662

But please keep a copy of it this time, I do not allow 'unofficial' remotes to stay on the server.

[klpe1957]

http://www.hifi-remote.com/forums/dload ... e_id=12662

But please keep a copy of it this time, I do not allow 'unofficial' remotes to stay on the server.

thx

[klpe1957]

Sorry again. This was not the correct file. If you remember, you build me one with Volume control on the page buttons. in this version, these buttons are greyed out.

Please have a look, if the updated version is available.

thx
Klaus

[alanrichey]

I just built that one specially this morning so it does have the Page+/- buttons defined. Did you remember to reset ALL the inputs to clear the previous Custom remote ?

[klpe1957]

you`re right, reset was the secret THX again

[alanrichey]

Good