Problem with PROTOCOLS section in V1.02 of URC-1067Bx3 ext.

If you have learned signals that don't get decoded when you look at them in IR.exe, post your file to the Diagnosis Area then post your question here (including a link to the file).

Moderator: Moderators

Post Reply
Anthony_Patrick
Posts: 104
Joined: Fri Oct 13, 2006 5:23 pm
Location: Burnaby, Canada

Problem with PROTOCOLS section in V1.02 of URC-1067Bx3 ext.

Post by Anthony_Patrick »

I am in the process of upgrading to an Arris Gateway / Portal CATV media system. In reprogramming my remotes I came across a problem with:
3A393A39 (Comcast DVR URC-1067Bx3 JP1.3 extender V1.02).rdf

According to IRScope the Arris Gateway / Portal system uses MCE protocol for the remote IR signalling. The PID is 012A:2 in the [PROTOCOLS] section of all the other URC-1067Bx3 rdf's other than the one I listed above where it is simply coded as 012A (and doesn't work). I changed the PID to 012A:2 in my local copy of the [PROTOCOLS] section of this RDF and it is now working.

Just thought I would let everyone know so whoever maintains this RDF can recheck the [PROTOCOLS] section in it.
Tony
Top
Post Reply

Return to “JP1 - Protocol Decodes”