View previous topic :: View next topic |
Author |
Message |
jetstar52
Joined: 16 Oct 2003 Posts: 177 Location: Sacramento, CA |
Posted: Fri Dec 20, 2013 7:33 pm Post subject: IRScope and 64-bit Windows 7 |
|
|
I recently "upgraded" from 32-bit to 64-bit Windows 7. I was able to get IR and RemoteMaster to work with my Delcom cable, but IRScope doesn't "see" my IR Widget, even though Device Manager shows the widget installed and working. Can anyone point me in the right direction to troubleshoot this issue?
Thanks in advance,
Mike _________________ I used to have 5 remotes that controlled one thing each. Now I have 6 remotes that each control everything! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Fri Dec 20, 2013 7:46 pm Post subject: |
|
|
In Device Manager, see what COM port number the widget has and select the same in IRScope.
I've also seen issues where devices won't work on USB 2.0 ports. If the plastic inside the port is blue, try a different port that has black instead. |
|
Back to top |
|
|
jetstar52
Joined: 16 Oct 2003 Posts: 177 Location: Sacramento, CA |
Posted: Fri Dec 20, 2013 11:27 pm Post subject: |
|
|
Thanks. Strange, though: after doing nothing different, I got the program to work. Tested both the black 2.0 port and the blue 3.0 port and no problems. _________________ I used to have 5 remotes that controlled one thing each. Now I have 6 remotes that each control everything! |
|
Back to top |
|
|
|