Sattelite receiver I-link IR210

maestro826 · Post by **maestro826** » Mon Jul 22, 2013 4:58 am

Please, can someone convert the rmdu file for IR210 to a wav file.
Thanks

Post by **vickyg2003** » Mon Jul 22, 2013 5:42 am

maestro826 wrote:Please, can someone convert the rmdu file for IR210 to a wav file.
Thanks

A wav file form what? Wav files are remote specific. The wav file will over write all other upgrades that were previously added. Have you added any other upgrades that we need to include in your new wav file?

maestro826 · Post by **maestro826** » Mon Jul 22, 2013 8:06 pm

I have an I-link FTA Satellite receiver(model IR210). I found in the this blog a rmdu file to be used in the URC9810 for that equipment. I do not have the jtag to transfer it so I was wondering if that file can be converted to a wav file so i can update my remote control. Thanks for your help

3FG · Post by **3FG** » Mon Jul 22, 2013 8:18 pm

Please tell us the model number of the remote to which you will upload the WAV file (i.e. the model number of your remotes). We have to know that in order to make a correct file. If your remote already has had an upgrade installed, we need to know the contents of the WAV file that was used before, because a new WAV file will overwrite any previously installed upgrade.

maestro826 · Post by **maestro826** » Tue Jul 23, 2013 1:45 am

It is a URC 9910 it has no upgrades. Thanks

Post by **vickyg2003** » Tue Jul 23, 2013 9:26 am

Give this a try
https://www.hifi-remote.com/forums/dload ... e_id=11979

Upload Directions are here
http://www.hifi-remote.com/wiki/index.p ... _Procedure

After you load the file, set the CBL or SAT button to setup code 2010

maestro826 · Post by **maestro826** » Wed Jul 24, 2013 7:40 am

Thanks for your support. Its result in an error. I will try to buy the cable.

Thanks

Post by **vickyg2003** » Fri Jul 26, 2013 8:00 am

I didn't see this post until now. This was the first wav file I
I produced on my new computer and it. Gave me a hard time. I didn't try uploading it to check it out. I'll test it later today and make sure that it loads correctly.

I assume you never got the Success message after playing the wav file. Does by our remote rattle? The modems in these remotes often come loose.

Post by **vickyg2003** » Sun Jul 28, 2013 11:42 am

Oops, I goofed. I thought I had been so careful, but I goofed big time. Please give this a try.

https://www.hifi-remote.com/forums/dload ... e_id=11979

maestro826 · Post by **maestro826** » Tue Jul 30, 2013 12:58 pm

Thanks a lot, it is working for most of the function. You are the best!

Post by **vickyg2003** » Tue Jul 30, 2013 3:11 pm

I'm glad it finally worked. Are you missing anything important?

Post by **vickyg2003** » Tue Jul 30, 2013 5:56 pm

maestro826 wrote:It is the guide bottom tha is missing, but it is ok. I am happy with what you gave me.
Thanks

In my book, that is an extremely important function.

This is one of those cases where buttons have dual labels. We have 4 similar upgrades in the file section, and none of them showed a guide, which I thought was really strange. A google of the remote yielded an image that clearly shows that the Red/Green/Yellow/Blue buttons also have a label, but the images are too small to read clearly. I think the GREEN might say EPG.
I've updated the WAV file to include that.

Could you tell me what the Red, Yellow, Green and Blue buttons say.

maestro826 · Post by **maestro826** » Tue Jul 30, 2013 8:55 pm

red = SAP (english/spanish)
green = EPG

Post by **vickyg2003** » Tue Jul 30, 2013 9:22 pm

I updated your WAV with the guide
https://www.hifi-remote.com/forums/dload ... e_id=11979

maestro826 · Post by **maestro826** » Tue Jul 30, 2013 10:05 pm

It is working perfect. Thanks

JP1 Remotes

Sattelite receiver I-link IR210

Sattelite receiver I-link IR210

Re: Sattelite receiver I-link IR210