View previous topic :: View next topic |
Author |
Message |
jetstar52
Joined: 16 Oct 2003 Posts: 177 Location: Sacramento, CA |
Posted: Sun Mar 03, 2013 3:22 pm Post subject: Insignia LKP woes |
|
|
I'm trying to place a macro on the LKP of a device button. I get no output from the remote. The macros work fine on other buttons. Here's my IR file:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11761
Thanks in advance! _________________ I used to have 5 remotes that controlled one thing each. Now I have 6 remotes that each control everything! |
|
Back to top |
|
|
pH7_jp1
Joined: 14 Sep 2003 Posts: 480 Location: Sterling Heights, MI |
Posted: Mon Mar 04, 2013 8:23 am Post subject: |
|
|
In all 3 cases, you have set DEV_AUX just before executing the phantom_ command. The LKP Special Protocols are defined on DEV_TV, DEV_STB, and DEV_DVD. Switch to the correct device, before invoking the phantom commands and you should be OK. After you do that, you don't actually have to use a different phantom command for each. There can be a phantom2 command for all 3 devices and when the correct DEV_xxx command is used just before the phantom2, then the right one will be executed. |
|
Back to top |
|
|
jetstar52
Joined: 16 Oct 2003 Posts: 177 Location: Sacramento, CA |
Posted: Tue Mar 05, 2013 1:01 am Post subject: |
|
|
Thanks very much! I have it working now. _________________ I used to have 5 remotes that controlled one thing each. Now I have 6 remotes that each control everything! |
|
Back to top |
|
|
|