JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Raw output to usable codes?

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
bevhoward



Joined: 24 Jun 2005
Posts: 248

                    
PostPosted: Fri Apr 13, 2012 10:39 am    Post subject: Raw output to usable codes? Reply with quote

Mike Sayrs posted a rmdu that included a request for the "sleep" code for Philips LCD TV's which I had available from a Harmony Remote.

However, it appears that I no longer have a jp1 remote with learning capabilities.

I was able to capture the raw output using Hip but don't know how to convert that to something that is jp1 usable.

Any clues or pointers?

Beverly Howard

raw code from two ir commands... note the first two characters in each transmission are different

Code:

00000000  B8 0F 8B 10 8B 07 8B 07 9C 19 8B 07 8B 07 8B 07
00000010  8A 08 8A 08 8A 08 8A 08 8A 08 93 11 8A 08 8A 08
00000020  93 08 8A 08 8A 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
00000030  7F 7F 7F 7F 5F                               

00000000  B7 10 8B 10 8B 07 8B 07 9C 19 8B 07 8B 07 8B 07
00000010  8A 08 8A 08 8A 08 8A 08 8A 08 93 11 8A 08 8A 08
00000020  93 08 8A 08 8A 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F 7F
00000030  7F 7F 7F 7F 5F                                 

Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Sat Apr 14, 2012 12:23 pm    Post subject: Re: Raw output to usable codes? Reply with quote

bevhoward wrote:
However, it appears that I no longer have a jp1 remote with learning capabilities.

What's wrong with your URC-8910 remote?
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
bevhoward



Joined: 24 Jun 2005
Posts: 248

                    
PostPosted: Sat Apr 14, 2012 12:41 pm    Post subject: Reply with quote

>> What's wrong with your URC-8910 remote? <<

There was a serious short circuit between the ears.

Assuming that a second led was required to learn before I posted the request, I looked at my pile of remotes and the only one that had 2 led's was the cinema6 ...which is not well.

I had just pulled out the remote manuals and re-discovered that the 8910 had learning capabilities and recorded the command when notice of your post arrived. When I get back to the computer with the parallel port, I will transfer the command and get it to the rmdu author.

Admonishment appreciated,
Beverly Howard
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Sat Apr 14, 2012 12:59 pm    Post subject: Reply with quote

Just in case the learns into the 8910 didn't "take", the normal Philip TV Sleep command is RC5 device 16, OBC 38.
Back to top
View user's profile Send private message
bevhoward



Joined: 24 Jun 2005
Posts: 248

                    
PostPosted: Sat Apr 14, 2012 1:08 pm    Post subject: Reply with quote

>> normal Philip TV Sleep command is RC5 device 16, OBC 38 <<

Got different results confirmed with two learns.

The following works on my Philips 47PFL7422D LCD TV

Code:

LEARNED SIGNALS:
Prot  Dev  OBC Hex EFC  Misc
RC6   0   71   47  248  T=1
RC6   0   71   47  248  T=0


edited code to clarify

I will also try yours to see if that works.

Thanks,
Beverly Howard
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Sat Apr 14, 2012 4:37 pm    Post subject: Reply with quote

With RC5/6 Toggle bit changes with every press, so just ignore that part and it will work fine.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control