Samsung blu ray player BD-C6900

HZ · Post by HZ » Sun Dec 11, 2011 5:02 pm

Hi,

I have the very same problem with a different device on the very same remote URC7556.

My Samsung blu ray player BD-C6900 isn't supported by the remote. OFA support tells me that the "DVD 0199" codes need to be added to the remote. I could send it in for the procedure.

Is there a beginners' manual out there that tells me how to do that myself? (I already have a JP1 cable.)

Thank you!

HZ · Post by HZ » Thu Dec 29, 2011 3:22 pm

Sorry, but: Bump.

3FG · Post by **3FG** » Thu Dec 29, 2011 4:54 pm

Well, you should read the "Just How Easy Is It" section in the Wiki. It tells how to make sure you have the correct interface cable (you need a flash JP1.2/1.3 cable for the 7556) and how to install and use RMIR.

The you would download e.g. the upgrade file for the BD-C6800 from the File Section, and use RMIR to upload it to your remote.

eferz · Post by **eferz** » Thu Dec 29, 2011 6:36 pm

3FG wrote:The you would download e.g. the upgrade file for the BD-C6800 from the File Section, and use RMIR to upload it to your remote.

Don't know if it helps, but I found a match for the Samsung BD-C6900 on the Logitech Harmony Database. Recorded the respective IR signals with the JP1 tools to create the respective files.

ICT file: http://www.hifi-remote.com/forums/dload ... e_id=10232
RMDU file: http://www.hifi-remote.com/forums/dload ... e_id=10233

HZ · Post by HZ » Sat Jan 14, 2012 3:48 pm

This is... awesome. Thanks a million, it works and you just saved me a few Euros.

Well, some buttons don't work (found the colour buttons missing, so far), but I can work that out myself.

Great, thanks again!

eferz · Post by **eferz** » Sat Jan 14, 2012 4:00 pm

HZ wrote:This is... awesome. Thanks a million, it works and you just saved me a few Euros.

Well, some buttons don't work (found the colour buttons missing, so far), but I can work that out myself.

Great, thanks again!

You're welcome. Glad it worked out for you. Thanks for the feedback.

Btw, I just checked the colour buttons. They shouldn't be missing in the upgrade. They're programmed on the remote. Are you saying that they are non-functional?

HZ · Post by HZ » Sat Jan 14, 2012 4:17 pm

Oh, that was my mistake. Those colour buttons work just fine now that I removed my old DVD players' key moves. Now the remote works as it should.

So again, great work. You guys helped me a lot.

eferz · Post by **eferz** » Sat Jan 14, 2012 4:28 pm

HZ wrote:Oh, that was my mistake. Those colour buttons work just fine now that I removed my old DVD players' key moves. Now the remote works as it should.

So again, great work. You guys helped me a lot.

Excellent. Glad to help. Thanks again for the feedback.