Search found 17 matches

by lukas_cz
Fri Oct 14, 2005 7:38 am
Forum: JP1 - Hardware
Topic: Problems with paralel interface on URC9960
Replies: 3
Views: 7153

Re: Problems with paralel interface on URC9960

Hi,
what type of parallel cabel do you use? Simle or Ultra?

I've the same problem with my URC9960BJ5 and parallel simple cable.
Lukas
by lukas_cz
Mon Oct 10, 2005 8:07 am
Forum: Code Search (Closed)
Topic: code for DVD YAMADA DVX 6600 and RC 15-2133
Replies: 26
Views: 29261

Here's the RDF that I created for your remote...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=2252

Before you try using the RDF though, you will need to fix something in the remote's memory. I replaced your IR file with an updated one, please download it and load it into the ...
by lukas_cz
Fri Oct 07, 2005 6:57 am
Forum: Code Search (Closed)
Topic: code for DVD YAMADA DVX 6600 and RC 15-2133
Replies: 26
Views: 29261

Here's the RDF that I created for your remote...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=2252

Before you try using the RDF though, you will need to fix something in the remote's memory. I replaced your IR file with an updated one, please download it and load it into the ...
by lukas_cz
Fri Oct 07, 2005 2:17 am
Forum: Code Search (Closed)
Topic: code for DVD YAMADA DVX 6600 and RC 15-2133
Replies: 26
Views: 29261

Re: exuse

Hi Lukas,
I notice that you still haven't loaded the upgrade file for your Yamada DVX 6600 to the file section from a year ago, so please take care of that before we do anything else.
Dear Rob,
I forget close this question about Yamada, thanks.
Lukas
I just checked and I see the Yamada file still ...
by lukas_cz
Thu Oct 06, 2005 7:03 am
Forum: Code Search (Closed)
Topic: code for DVD YAMADA DVX 6600 and RC 15-2133
Replies: 26
Views: 29261

mistake- not URC-9066BJ5, but URC-9960BJ5


As for the URC-9066BJ5, you can either email me the IR file or you can post it in the Diagnosis Area folder in the File Section (and then post a link to it here, or nobody will look at it). With this I can make a generic RDF for it, but the RDF won't be good enough for you to create upgrades. For ...
by lukas_cz
Thu Oct 06, 2005 6:57 am
Forum: Code Search (Closed)
Topic: code for DVD YAMADA DVX 6600 and RC 15-2133
Replies: 26
Views: 29261

files was upload to Diagnosis Area folder as URC-9960JB5


As for the URC-9066BJ5, you can either email me the IR file or you can post it in the Diagnosis Area folder in the File Section (and then post a link to it here, or nobody will look at it). With this I can make a generic RDF for it, but the RDF won't be good enough for you to create upgrades. For ...
by lukas_cz
Thu Oct 06, 2005 6:51 am
Forum: Code Search (Closed)
Topic: code for DVD YAMADA DVX 6600 and RC 15-2133
Replies: 26
Views: 29261

exuse

The Robman wrote:Hi Lukas,
I notice that you still haven't loaded the upgrade file for your Yamada DVX 6600 to the file section from a year ago, so please take care of that before we do anything else.
Dear Rob,
I forget close this question about Yamada, thanks.
Lukas
by lukas_cz
Thu Oct 06, 2005 5:27 am
Forum: Code Search (Closed)
Topic: code for DVD YAMADA DVX 6600 and RC 15-2133
Replies: 26
Views: 29261

URC-9960BJ5 and RDF file

Dear Mr. Robman,
I'm fan to US RC Kameleons from Czech Republic. I have RC 15-2133. You helped me to get DVD Yamada protocol (on JP1 forum) into my 15-2133 by simlple cable and IR without problems two years ago.
My friend bought me a my friends (RC fan's too) new RCs URC-9066BJ5 in USA. I wanted to ...
by lukas_cz
Wed Mar 17, 2004 6:05 am
Forum: Code Search (Closed)
Topic: code for DVD YAMADA DVX 6600 and RC 15-2133
Replies: 26
Views: 29261

Lukas,

Learn as many commands as you can and look under the learned tab in IR. When you select a learned command you should see something in the top box under Protocol, Device, Sub-device, OBC, EFC, and HEX.

Save the file in IR with the learned commands. If you don't see any entries in the top ...
by lukas_cz
Wed Mar 17, 2004 6:03 am
Forum: Code Search (Closed)
Topic: code for DVD YAMADA DVX 6600 and RC 15-2133
Replies: 26
Views: 29261

When you learn the signals from the Yamada, does IR show any of that info (Protocol, Device, Sub-Device, OBC, EFC, etc) on the Learned Signals tab?

Thanks Mark,
I downloaded all infos from IR (protocol NEC1, Device 4, all buttons EFC codes), and setup code I selected as 2000. Now is all right ...
by lukas_cz
Fri Mar 12, 2004 9:24 am
Forum: Code Search (Closed)
Topic: code for DVD YAMADA DVX 6600 and RC 15-2133
Replies: 26
Views: 29261

Thank's, I know, but wan't learn my RC, bu use JP1 cable and KM, the johnsfine sent to me code (rmdu format) for TV Thomson yet.
I'm not quite sure what you're saying here.

If you are saying that you don't want to the learn the signals because you would rather use the JP1 cable and KM to create ...
by lukas_cz
Fri Mar 12, 2004 6:34 am
Forum: Code Search (Closed)
Topic: code for DVD YAMADA DVX 6600 and RC 15-2133
Replies: 26
Views: 29261

Hi Lukas,
Assuming that you still have the Yamaha remote, you can solve this yourself using the 15-2133's learning feature.

Please read the thread entitled "#1 FAQ" for more info.

Thank's, I know, but wan't learn my RC, bu use JP1 cable and KM, the johnsfine sent to me code (rmdu format) for TV ...
by lukas_cz
Thu Mar 11, 2004 4:18 am
Forum: Code Search (Closed)
Topic: code for DVD YAMADA DVX 6600 and RC 15-2133
Replies: 26
Views: 29261

code for DVD YAMADA DVX 6600 and RC 15-2133

Hi,
have anybody code for DVD YAMADA DVX 6600 and RC 15-2133.
Thanks a best regards
lukas
Czech republic
by lukas_cz
Tue Dec 23, 2003 4:24 am
Forum: Code Search (Closed)
Topic: code for TV Thomson 32WF402G and RC 15-2133
Replies: 14
Views: 26754

to Steve,
sorry for my latest replay, I had heavy tonsillitis.
I converted all codes into IR, and all are OK, super, very thanks.
One next question, how set all buttons together for arbitrary device on my RC 15-2133 (each device have different buttons). The 'move' function I'cant use, because eg ...
by lukas_cz
Tue Nov 25, 2003 6:44 am
Forum: Code Search (Closed)
Topic: code for TV Thomson 32WF402G and RC 15-2133
Replies: 14
Views: 26754

to Steve,
thanks, because I havn't JAVA on my PC, I must say for run RM to my colege tomorow. After this I try this.
Regards Lukas