JP1 Remotes

It sounds like it's toggling to me. Have you tried to build an upgrade with your learned codes? I had that problem once and an upgrade fixed the problem. Learned toggle codes don't seem to work, but the upgrade built from the learned signals worked great. Be sure to delete the learned keys though ...

I normally get well over a year on my 8910s, I rarely use the backlight and surf moderately. My dad gets about 6 months on his, but he uses the backlight all of the time.

JP1 or Jumper1 on computer motherboards refers to the actual connection part which is usually connected/disconnected with a little plastic jumper. The term "JP1.2" confuses that analogy a bit though, it seems to be referring to the type of circuit.

If you google "program remote", "JP1 Interface for the 15-1994" with the url "www.hifi-remote.com/jp1/" comes up at the bottom of page 3. Perhaps a keyword update would help things.

Yep.. Pretty good group of guys and gals here. They sure invest a lot of time helping people. Hats off too y'all

Well, as it turns out, the upgrade wasn't the problem.. so it wouldn't have done any good to post it. Ever thought about anger management classes? Anywho.. To those that want my thanks.. thank you.. to those that don't.. adios

ok.. now I totally feel like a bonehead. I had already deleted all the upgrade files I had made, so I made another one to show you Capn, just so you could show me what I had done wrong for next time. I went ahead and loaded it to my remote just to make sure it didn't work.. low and behold, it works ...

ummm.. I had tried keymoves on the remote with no luck, but not in IR. I followed your instructions and now it works better than the original I'm so pleased. I want to thank everybody for helping me with this. You folks are the best!

Mike

yes whompuss, it's recs80 protocol with device 5, but I didn't know which recs80 it was.. thanks for the 45. I checked out Rob's manual settings without much luck. I played with the learning procedure (double clicking the original) and had some success. It now works momentarily, but is consistant ...

hey guys, thanks for the input

I can't find any signals in any codes that will work the volumes. I've tried to build codes using the learned data with no luck. It appears the codes I build set the toggle to T=0 by default, I can build a code that has a T=1 or T=0 toggle, but I can get that from the ...

Hi folks,
After a couple of hours of reading here. I have found some postings that I recognized as close to answering my problems. I probly just don't know enough to recognize the answer when I see it.

Here goes..
I have an Insignia DVD/Reciever HT. I use DVD 0651 and most buttons seem to work well ...