JP1 Remotes

Experimenting with the Segment 13 data I've found something new - at least it was new to me:
The last non-FF value (03 in this case) seems to define (or influence) the delay between the execution of 2 consecutive macro key signals. I've changed that value to 64 and it took ~ 10 seconds between 2 ...

Hi 3FG,

thank you for your reply.

It has the same signature as the 2981.
That's why I had tried the "351201 (URC 11-2981 R01).rdf" first. ;-)
And I could see very quickly, that this RDF was a good start (whereas the 3920 RDF didn't really match - that one may be from a R00 or R01 revision remote ...

Hello,

recently I've bought this URC-3940 remote control to replace an old remote.
I've found the "usual" 6-pin connector inside of the battery compartment, so I was confident to get it programmed to totally fit my needs.

To make a long story short:
It looks like there is no support for it yet ...

Hi,

in RemoteMaster 2.02a (Device Upgrade Editor)
when I open Menu -> Options|Remotes|Edit preferred...
I can always enlarge the number of remotes in the list of "Preferred Remotes", but
I'm not able to reduce the number of remotes.
When I remove an entry from the "Preferred" list (lets say - had ...

Now I'm totally confused. :(

I can confirm, what PeteHarland wrote.

When I start RMIR from the start menu entry (that's "RemoteMaster.exe -ir"),
Help|About says" "RemoteMaster v2.02a".

Help|Check for update says:
"Version v2.02a of RemoteMaster is available, but you are still using
version 2.02 ...

Ahh. Looks like I've found it (already)! :D

To my surprise, no "Ruwido" or other strange things - simply NEC1 (38kHz), Dev 0 / Sub 80.
I had tried a lot of NEC1 dev/sub combinations before without success.
But the solution was just one subdevice away.

After Vicky's post I thoroughly inspected the ...

Thanks for the quick replies and suggestions.

I'll give them a try and post the results.

I have found a (very) little problem with RM IR.
Perhaps that issue had already been addressed elsewhere,
but I haven't found such a topic.

RemoteMaster v2.02a (Standalone Windows version)

About Java IR:
...
System Properties:
java.version = "1.6.0_10"
java.vendor = "Excelsior, LLC"
os.name ...

The IFOX-TC is the "Telecolumbus" (Cable Company Germany) version.
But it looks like even the "-TC" has different models.
Or at least there are boxes with different remote control devices
(Ruwido in this case?).

According to the manual the right one should look like this:
http://www.kkc-eutelsat.eu ...

Hello,
recently got that Cable Receiver from a friend.
But he didn't have the remote anymore.

1. Device: HUMAX IFOX-TC/Ruwido/DE (that's how it is labeled, exactly)
2. Type of device: Cable Receiver
3. Year: ~2008
4. JP1/UEI Remote model: URC-7541, URC-7552
5. Do you have a JP1 cable? Yes
6. Still ...

I tried again to complete my Grundig16 00 AB protocol version (command translator part).
But now I see (again) that it is not possible to generate the correct OBC values using the XORCheck "trick".
So your GrundigXLator obviously is the way to go.

I think it will work with both protocols (00 AB and ...

... and new

I found a new NRC17 version here
http://hifi-remote.com/forums/dload.php?action=file&file_id=3367
(also called 00 BD).

This one has a different code section (there is only one for S3C80).

If I understand it right, this version is built into newer remotes,
<edit> SAT 1723 </edit>
but ...

old...

A friend of mine bought a NOKIA "Mediamaster 150 T" (DVB-T receiver) at ebay without remote control (for 1 Euro 8-) ) .

I discovered that it uses the NRC17 protocol, but I couldn't get the NRC17 (=00 BD) in RM to work.

After doing some research I found that (at least for some older S3C80 ...

... The problem is that you do no conversion in the Command Translator, but John uses the same conversion for it as for the Device Translator...


I have some scripts, where I also started to do conversion for the Command translator.
But I created that entry nearly 2 years ago and I don't recall ...

I upgraded from RM 1.40 to RM 1.97 recently (well, in fact I just tried
to use the new version 8-) )

But the new one only showed me a window saying
"Remote Load Error"
"java.lang.NullPointerException"
"at java.lang.Void.<unknown>(Unknown Source)"
...

Now I found that this is caused by an entry I ...