JP1 Remotes

xsight touch and similar remote have metallic micro-dome keys

like that https://www.snaptron.com/products/pcb-p ... gx-series/

if they not centered right is it not work

third remote is URC-7880 , look like 7980 but some buttons different (around netflics button )

bought from ebay for 29$ , seeking BLED112

if anyone need i have full firmware dump from system flash with latest firmware from xsight 8005 and 8002 models (touch and color ) and have dump with old firmware from 8005 model

but cheap chinese programmers like tl866 or rt809f doesn't properly recognise atmel spi dataflash AT45DB321 from this ...

i buy replacement board (remote with dead screen) for 15$ from this seller

http://www.ebay.com/usr/allshop29?_trks ... 1543.l2754

latest alpha - all work ok on Xsight Color (id 8002) on Windows 8.1 with registry path from first post (manually edited for 8002 remote )

great work with ir toy

and yes 8602 and 8603 almost the same ( i have 8603 with broken backlight )

yes i try this

remote found and downloaded some bytes

Testing interface: CommHID
Interface matched. Trying to open remote.
Remote found: Manufacturer = UNIVERSAL ELECTRONICS INC., Product = XSIGHT., Product ID = 8002
Opened on Port HID
Interface opened successfully
Base address = $0
Read ...

what about support for Xsight Color - USB8002 , latest alpha have no connection with it

Bluetooth-to-IR-blaster
http://reviews.cnet.com/2300-6482_7-10012882-12.html

finally - under strong light i see buttons on lcd . remote working but no lcd and button backlight and charging

Anyone knows how to perform some kind of reset? (I've already tried to remove batteries)
Button combination, hold button(s) and put battery back, etc?

try to press OK and Power without battrey and place battery keep pressing

in my case after this - i find strange results , place over charging ...

if anyone need

Nec x2 Device 7 Sub Device 7

factory - OBC 59 EFC 27

3speed - OBC 60 EFC 20

service menu enter from on - info + factory
in service menu press factory and then 3speed for enable grayed menu items , factory two times for store and exit

Are you sure its dead and not just in a coma? Have you tried new batteries and a manufacturers reset?

all internal power supply ok (1.8v and 3.0v on arm cpu , akku ok = 4.18v, clicking noise from buzzer , on start current is 200 - 230 ma from external PSU on 4.2v

i have one xsight touch suddenly dead - some pictures of hardware

http://img534.imageshack.us/img534/6043/xsight105424001.th.jpg
http://img580.imageshack.us/img580/9459/xsight105408002.th.jpg
http://img412.imageshack.us/img412/8092/xsight105354004.th.jpg
http://img42.imageshack.us/img42 ...