JP1 Remotes

I will fiddle with it in next days, have saved settings that works so I can always go back while testing and learning stuff.

Thanks again, I really appreciate all that helped in making it happen to work with Lyngdorf.

Do you need to clone it 3 times or just one "Device button" can also work?

Try this file to see if it works, if it does, feel free to customize the button layout as you see fit.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26201

Keep in mind that this remote doesn't have any device buttons, so I have added the upgrade 3 times and assigned it to each ...

That is exactly right.

I have a problem. It is like the remote is in read-only mode for me.

I do the following:

1. Open RMIR, then Download from attached remote.
2. Switch to Devices tab where I have:

https://i.imgur.com/xiFuuaA.jpg

3. I click Edit on the device that is listed on the ...

I can confirm that Waveshare board works. I can download info from remote in RMIR.

On Win10, just installed the latest drivers from FTDI, latest Java Runtime and the latest stable RemoteMaster bundle and it just works.

I just dug my Streamer remote out to see which pin was which and I can confirm that the #1 pin is in the bottom left corner (with the notch on the right).

However, I found that only my genuine FTDI cable worked with it, my Prolific cable did not. The prolific cable got the "no remotes" message ...

From I have read here, I can use the remote batteries as a power source without connecting VCCIO from the board and it is actually not even recommended.
So in that way it should be safer while leaving the jumper in 3.3V position.

It is in polish: https://allegro.pl/oferta/konwerter-usb-ttl-uklad-ftdi-ft232rl-9979654199

Translated description:

USB cable is TTL to FT232RL
USB to RS232 TTL converter module based on FT232RL by FTDI. The module allows you to connect devices with an RS232 port to a computer or laptop in order ...

Best I can say is, it *might* work. As you can see from my post in the other thread where you're talking about this, my FTDI cable *does* work with the streamer remote whereas my Prolific cable does *not* work (even though it does work with other remotes), and I can't tell from that page whether ...

Can anyone help and confirm that I could use this board and 6pin cables? I can either order from china/ebay and wait 2-3 weeks or I can buy it locally. They sell in Poland board from Waveshare with 6x 1pin cables:

https://www.waveshare.com/ft232-usb-uart-board-type-a.htm

https://i.imgur.com ...

I have created an RMDU file for the Lyngdorf TDAI-1120 amplifier here:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26194

Keep in mind that the URC-7935 has very few buttons, so for it to be really useful you would need to assign something to the 4 channel buttons (Netflix ...

Hello

I have ordered Streamer Remote to be able to control Lyngdorf TDAI-1120 amplifier (it does not come with remote).
From what I understood so far, I need a:
- "6PIN 5V FTDI FT232RL FT232 USB to TTL RS232 Serial Download Adapter Connector Cable"
- win10 drivers
- latest RMIR

and then I can ...