JP1 Remotes

Ok, thanks for you help. Where's the best place to buy a JP1.2 cable?

David

The user guide doesn't have HP listed as a TV in the device codes list. HP says to use the Philips code. These 3 Philip device codes all work the same: 1454, 0054, 1154 - only buttons that work are volume/mute, power toggle and input toggle.

I tried the EFC's listed here and here , but the only ...

1. Device: HP LT3700 LCD HDTV
2. Type of device: TV
3. Year: 2007
4. JP1/UEI Remote model: URC-8820
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes, TV/1454
10 ...

I have a OFA 6131nw remote programmed using DVD device code 1272 to control my Windows Media Center PC. I found the Windows Media Center upgrade file in the file section and was able to program most of the keys using the EFC's. However, there's one button on my original remote that's missing from ...

I tried to upgrade my URC-6012 to JP1 without success. I also tried to build a JP1 cable but never could get either to work. I wanted JP1 mainly so I could create macros on the device keys.

Recently, I bought a Windows Media Center PC. So, I called OFA about uprading my URC-6012. They told me they ...

Last weekend I put together an interface cable using the simple design instructions. I also followed the instructions on Adding an EEPROM chip to the URC-6012w : I soldered the wire across JMP2. I soldered the 6-pin header to JP1. I soldered the EEPROM (24C16N) to U2. When I tried to initialize it ...

Wow, that was it! Sorry, I thought the batteries were new. I'm glad I didn't try to return it

Thanks.

My C6 just died so I picked up a new 6012w at Walmart today. I noticed the device codes were the same as the ones used on my C6. I first programmed the TV, no problem. I then tried to program the VCR. It appears to have accepted the code but nothing works. I tried all the codes for my brand (Hitachi ...

If I add the JP1 connector to my 15-2103, will I then be able to program the POWER button?