JP1 Remotes

alanrichey wrote:Thanks for the feedback. I can always change it if you like

Thanks Alan

If you can change the "Last Channel" mapping back to "Exit" that would be awesome!!

alanrichey wrote:Here you go

http://www.hifi-remote.com/forums/dload ... e_id=13932

Thanks Alan

Working Great!!

RE: For other users using this file
The "exit" button is mapped to "Last Channel"

1. Device: TVPad 4 M418 GCN
2. Type of device: TV Set top Box
3. Year: 2014
4. JP1/UEI Remote model: n/a
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes, TVPad 2 ...

Morning all. You have been busy while I was asleep :D

Right here are some pointers:

1. Yes, you should be using the PL file.

2. As you say the emitter light is firing I assume you have the external IR Blaster plugged in ? Or can you see the internal emitter working ?

3. I don't understand why ...

"doesn't work" isn't useful. Did your try both the Pl and RV files? Made sure to use C2013 (most of our Slingbox bin files were prepared by Alan Richey, and he uses 2010. I used 2013.)

Emitters are firing? (Use a digital camera to see if the emitters flash. Have you read Alan's instructions which ...

Here's a Slingbox binary file , based on UEI setup code Cable 1811. That shoots NEC1 device 0, subdevice 127.
If it doesn't work, don't be discouraged.... it's probably my mistake.

No, you can't read out the contents of a built in setup code from the remote. But the Lookup Tool (link at the top of ...

That's a UEI remote, so we can probably recognize the srtup code the cable box uses. Blink back the setup code and post it here.


Thanks for replying

I have test on my remote for both the setup for <TV>+<OK> and <STB>+<OK>, and enter 990

For <TV>+<OK>
the light blinks after are the following:
1 ...

Hi All,

I have been trying with lots of custom bins but no one seems to work (no button is working with any of the custom bins)

Below is the model of the Set top box:

Manufacturer: BUSH
Model: BHAS02UR
Reference link: http://usaudiovisual.com.au/hometheatre/bush-bhas02ur-hd-dvr-recorderset-top ...