JP1 Remotes

In fact, it is the same than URC39940 R01
So it's ok, I've got it.

Hello

I am looking for the RDF file and if it exits the assembly of a URC-39940 R02
Remote :

URC39940R02
9RC32C-1069

Thanks,

sigue.

Thanks,
It works fine.

Hi,

I'm using the Sharp/Denon-K protocol ($01 $C8) with the 4 devices below:

K4.1 , K4.3, K4.5, K4.7

Fixed data are : 2A 4C 28 2C 2A 2E EA 00
I get the device code by using the 3 bits values below:

000 = 0 selects 28 = K4.1
001 = 1 selects 2C = K4.3
011 = 3 selects 2A = K4.5
100 = 4 selects ...

Hi,

I'm waking up this post.

I'm trying to use multiplexor with the URC-39940R01 remote

I've tried every thing in this post, also the patch process, but nothing do : the code device does not change.

You can find my .IR file here :
http://www.hifi-remote.com/forums/dload.php?action=file&file_id ...

That was it !
It's working with RM 1.89.

I hope futur versions of RM will include back the duration column, witch miss RM 1.90.

Thanks a lot binky123.

I have nearly the same problem.

I try with my URC-39930 BJ0-03 dreambox remote, witch signature is 10381038, to program a long keypress for a BigBen DVD Remote to turn of a PS3
I'm using the NECx2 protocol witch works very fine.

I tried to build a device combiner for the PS-Home key, but when i ...

I will have a look to the Protocol Builder spreadsheet.

Thank you, Rob.

All keys are working, pushing a long time, but the time for the motor of the blind to start is much bigger than the original remote (nearly 1 seconde after pressing key). I gess the gab after the 2nd repeat about this.
How ever, the stop key, witch was ok in the first update, still stop the blind ...

You were right. my learned codes doesn't work each times. In fact, the problem appends with the original remote, and for up and down keys, to be shure the blind starts, I have to push the key for a longer time.

So, I tried again your upgrade, but it just send short signal, even if i keep the key ...

As I really think the same key don't give the same code, i do a new code sequence learning, coresponding the one I tryed. My mistake was you never press the same key few times, because when the blind start going up, if you press up again, nothing new will append.

So I learned the keys in this new ...

thank you very much Rob.

I've tried this upgrade on my URC-8820 : nothing's working

I've tried it on my URC-39730 : the stop key works well,
whereas the up and down keys work 1 time, and not some other times,
likely it did not send the same signal each time you press the same key.

So, i post a ...

1. Device: Velux Window Blind
2. Type of device: Window Blind
3. Year: 2007
4. JP1/UEI Remote model: Dreambox URC-39730 and URC-8820
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working ...

The volume keys are used with the amplifier, but sometime I need to cut it, and I need the TV volume control. So,that's why I want a macro to do it.

this is strange, my amplifier is on AUX. and VPT works on all devices.

On my 39930, VPT is working. What i want to do, is a macro that can change the VPT device.
In your case, you can set the VPT device in the IR.exe general tab,
set VPT Device to TV, set VPT status to ON, and set AUX use VPT to YES. It works without keymove.