Magic Key codes for Samsung 709
To set up a One For All or Radio Shack remote to work the Samsung 709, first re-assign the device key that you wish to use to be a receiver device, then assign code 0121 (or 121 for remotes that use 3 digit codes) to it. You will then need to re-assign all the buttons using the codes listed below. You can program up to 45 buttons, so don't program buttons that you are unlikely to need.
Click here for the hack instructions.
The original codes were obtained from Samsung 709 FAQ
NOTE: some models of Samsung DVD players respond to DVD code 0573, which is a different signal to the RCVR/0121 signal.
| Feature | Magic Key | Feature | Magic Key |
| Power | 070 | Cursor Left | 200 |
| Return | 071 | Cursor Right | 198 |
| Menu | 075 | Cursor Up | 069 |
| Subtitle | 073 | Cursor Down | 202 |
| Subtitle | 074 | Play | 210 |
| Cold Start | 078 | Play/Pause | 234 |
| Adjust | 079 | Stop | 232 |
| All LEDs | 081 | Eject | 139 |
| 3D Sound | 100 | Enter | 196 |
| Bookmark | 102 | Fast Forward | 201 |
| Zoom | 104 | Fast Rewind | 203 |
| Repeat A+B | 106 | Prev Chapter | 197 |
| Volume | 107 | Next Chapter | 230 |
| Setup | 132 | Repeat | 199 |
| Display | 133 | Mode | 228 |
| Display | 135 | Mode | 229 |
| Audio | 137 | Step | 233 |
| MPEG/DTS LEDs on | 141 | Clear | 235 |
| Cold Start (C5 02 2) + Eject | 145 | Setup | 132 |
| 0 | 010 | Display | 133 |
| 1 | 006 | Display | 135 |
| 2 | 008 | Audio | 137 |
| 3 | 004 | ||
| 4 | 011 | ||
| 5 | 007 | ||
| 6 | 009 | ||
| 7 | 005 | ||
| 8 | 138 | ||
| 9 | 134 |
|
|
